RIF Relay Deployment

Set Up RIF Relay Contracts and Server

Deploy Contracts

Start by deploying on-chain components. All tools needed are in the RIF Relay Contract repository

  • Regtest
    1. Clone the Repository:
      git clone https://github.com/rsksmart/rif-relay-contracts
    2. Navigate to the directory and install dependencies:
      cd rif-relay-contracts
      npm install
    3. Deploy the contract:
      npx hardhat deploy --network regtest

    This uses the Regtest configuration from hardhat.config.ts.

    After deployment, you'll see a summary of the deployed contracts. This summary includes the on-chain components essential for RIF Relay, and additional contracts for testing and validation purposes. ┌───────────────────────────────────────┬──────────────────────────────────────────────┐ │ (index) │ Values │ ├───────────────────────────────────────┼──────────────────────────────────────────────┤ │ Penalizer │ '0x77045E71a7A2c50903d88e564cD72fab11e82051' │ │ RelayHub │ '0xDA7Ce79725418F4F6E13Bf5F520C89Cec5f6A974' │ │ SmartWallet │ '0x83C5541A6c8D2dBAD642f385d8d06Ca9B6C731ee' │ │ SmartWalletFactory │ '0xE0825f57Dd05Ef62FF731c27222A86E104CC4Cad' │ │ DeployVerifier │ '0x73ec81da0C72DD112e06c09A6ec03B5544d26F05' │ │ RelayVerifier │ '0x03F23ae1917722d5A27a2Ea0Bcc98725a2a2a49a' │ │ CustomSmartWallet │ '0x1eD614cd3443EFd9c70F04b6d777aed947A4b0c4' │ │ CustomSmartWalletFactory │ '0x5159345aaB821172e795d56274D0f5FDFdC6aBD9' │ │ CustomSmartWalletDeployVerifier │ '0x7557fcE0BbFAe81a9508FF469D481f2c72a8B5f3' │ │ CustomSmartWalletRelayVerifier │ '0x0e19674ebc2c2B6Df3e7a1417c49b50235c61924' │ │ NativeHolderSmartWallet │ '0x4aC9422c7720eF71Cb219B006aB363Ab54BB4183' │ │ NativeHolderSmartWalletFactory │ '0xBaDb31cAf5B95edd785446B76219b60fB1f07233' │ │ NativeHolderSmartWalletDeployVerifier │ '0xAe59e767768c6c25d64619Ee1c498Fd7D83e3c24' │ │ NativeHolderSmartWalletRelayVerifier │ '0x5897E84216220663F306676458Afc7bf2A6A3C52' │ │ UtilToken │ '0x1Af2844A588759D0DE58abD568ADD96BB8B3B6D8' │ │ VersionRegistry │ '0x8901a2Bbf639bFD21A97004BA4D7aE2BD00B8DA8' │ └───────────────────────────────────────┴──────────────────────────────────────────────┘ The deployment summary shows two sets of Smart Wallets, each paired with its verifiers. This is because the verifier is used for both deployment and transaction validation. For testing purposes, the focus will be on using these Smart Wallet Contracts.
  • Testnet
    1. Ensure your account is funded. You can get funds from the tRBTC Faucet.
    2. Deploy on Testnet:
      npx hardhat deploy --network testnet

      Remember to configure Testnet in hardhat.config.ts.

      Existing RIF Relay contracts deployed on Testnet can be found in the contracts section.
  • Mainnet
    1. Ensure your account is funded.
    2. Deploy on Mainnet:
      npx hardhat deploy --network mainnet

      Ensure Mainnet is set up in hardhat.config.ts.

      Existing RIF Relay contracts deployed on Mainnet can be found in the contracts section.

Revenue Sharing

Revenue Sharing is an optional feature in RIF Relay that can be implemented using collector contracts. You can deploy multiple Collector contracts, but they are not included in the default Relay contract deployment. For detailed information on Collector contracts, refer to the architecture documentation.

Before deploying a Collector contract ensure the following:

  1. Ensure the chosen token for the Collector contract is the same as the one used for transaction fees.

    Note: You cannot retrieve any other tokens other than the one set during Collector deployment.

  2. Select an appropriate owner for the Collector contract. This owner doesn't have to be the deployer but must have the authority to execute the withdraw function, or else the revenue funds will be locked in the contract.
  3. Set up partners and their share percentages, ensuring the total adds up to 100%. Incorrectly sent tokens to an inaccessible address without a private key from the beneficiary will be lost. For an example of a structurally valid revenue shares definition see sample configuration.

  • Regtest
    1. To deploy the Collector contract, we'll use the [RIF Relay Contract](https://github.com/rsksmart/.
    2. Create a configuration file named deploy-collector.input.json with the required structure:
      {
        "collectorOwner": "0xCD2a3d9F938E13CD947Ec05AbC7FE734Df8DD826",
        "partners": [
            {
              "beneficiary": "0x7986b3DF570230288501EEa3D890bd66948C9B79",
              "share": 20
            },
            {
              "beneficiary": "0x0a3aA774752ec2042c46548456c094A76C7F3a79",
              "share": 35
            },
            {
              "beneficiary": "0xCF7CDBbB5F7BA79d3ffe74A0bBA13FC0295F6036",
              "share": 13
            },
            {
              "beneficiary": "0x39B12C05E8503356E3a7DF0B7B33efA4c054C409",
              "share": 32
            }
        ],
        "tokenAddresses": ["0x1Af2844A588759D0DE58abD568ADD96BB8B3B6D8"],
        "remainderAddress": "0xc354D97642FAa06781b76Ffb6786f72cd7746C97"
      }

      Note: The collectorOwner, beneficiaries, and remainderAddress are the first five accounts provided by the node in Regtest.

    3. Deploy the contract:
      npx hardhat collector:deploy --network regtest
      The collector is ready and can start receiving fees.
  • Testnet
    • Using the configuration file you created in the regtest section, run this command to deploy the contract:
      npx hardhat collector:deploy --network testnet
  • Mainnet
    • Using the configuration file you created in the regtest section, run this command to deploy the contract:
      npx hardhat collector:deploy --network mainnet

Allow Tokens

RIF Relay only accepts whitelisted tokens, primarily to ensure only tokens of value to the operator are accepted. To whitelist a token: Execute the acceptToken(address token) function on the Relay Verifiers contracts, which include:

  • SmartWalletDeployVerifier
  • SmartWalletRelayVerifier

Note: This action must be performed by the contracts' owner, typically the account that conducted the deployment.

  • Regtest
    • In the RIF Relay Contracts, execute this command:
      npx hardhat allow-tokens --network regtest --token-list <TOKEN_ADDRESSES>

      <TOKEN_ADDRESSES> is a comma-separated list of the token addresses to be allowed on the available verifiers. The allowTokens uses the first account (referred to as account[0]) as the owner of the contracts. This is important because only the account owner can allow tokens.

  • Testnet
    • In the RIF Relay Contracts, execute the command:
      npx hardhat allow-tokens --network testnet --token-list <TOKEN_ADDRESSES>

      <TOKEN_ADDRESSES> is a comma-separated list of the token addresses to be allowed on the available verifiers. The allowTokens script will use the Testnet network configured in the hardhat.config.ts, this network will be required to use the account that deployed the contracts. You can also modify the allowed tokens for specific verifiers only by using the --verifier-list option as follows:

      npx hardhat allow-tokens --network testnet --token-list <TOKEN_ADDRESSES> --verifier-list <VERIFIER_ADRESSES>
      Like <TOKEN_ADDRESSES>, <VERIFIER_ADDRESSES> is a comma-seperated list of verifier addresses to allow the tokens for.
  • Mainnet
    • In the RIF Relay Contracts, execute the command:
      npx hardhat allow-tokens --network mainnet --token-list <TOKEN_ADDRESSES>

      <TOKEN_ADDRESSES> is a comma-separated list of the token addresses to be allowed on the available verifiers. The allowTokens script will use the Mainnet network configured in hardhat.config.ts, this network will be required to use the account that did the deployment of the contracts. You can also modify the allowed tokens for specific verifiers only by using the --verifier-list option as follows:

      npx hardhat allow-tokens --network testnet --token-list <TOKEN_ADDRESSES> --verifier-list <VERIFIER_ADRESSES>
      Like <TOKEN_ADDRESSES>, <VERIFIER_ADDRESSES> is a comma-seperated list of verifier addresses to allow the tokens for.

Note: The network name; regtest, testnet, or mainnet, is an optional parameter that is taken from the hardhat.config.ts file. The network name you specify must be the same as the one used to deploy the contract.

Run the RIF Relay Server

After setting up on-chain components, the next step is to set up off-chain components, using the RIF Relay Server. Configuration of the Relay Server is streamlined using the node-config package. For detailed advantages of this package, visit their wiki.

The TL;DR: In the config directory, create a file named local.json. For visual insights into how the Relay Server functions, refer to the diagrams available here.

  • Regtest
    1. Here's a configuration example for setting up the RSKj node locally with the contracts deployed in Regtest:
      {
        "app": {
          "url": "http://127.0.0.1",
          "port": 8090,
          "devMode": true,
          "logLevel": 1,
          "workdir": "./enveloping/environment/",
        },
        "blockchain": {
          "rskNodeUrl": "http://127.0.0.1:4444",
        },
        "contracts": {
          "relayHubAddress": "0xDA7Ce79725418F4F6E13Bf5F520C89Cec5f6A974",
          "relayVerifierAddress": "0x03F23ae1917722d5A27a2Ea0Bcc98725a2a2a49a",
          "deployVerifierAddress": "0x73ec81da0C72DD112e06c09A6ec03B5544d26F05"
        }
      }

      Note: Relay and Deploy verifiers use the contracts from the Smart Wallet section in the summary.

      The meaning of each key can be found in RIF Relay Server Configuration
    2. To start the server, run the following command:
      npm run start

      By default, the server uses the default.json5 file in the config directory. Depending on the profile in NODE_ENV, the values in the default.json5 file is overriden.

      At this point the server should be running and ready to start processing transactions, however, you still need to register the off-chain components in the Relay Hub.
    3. To enable the server for transaction processing, you must register the off-chain components in the Relay Hub. This step requires the server to be active. To register the components, in a different terminal window, execute the following command:
      npm run register
      The register process performs the following actions:
      • Stakes the Relay Manager
      • Adds the Relay Worker
      • Registers the Relay Server
      The server is now ready to start processing transactions and a ready message is diplayed on the console. For more details on configuration and registration parameters, refer to the RIF Relay Server documentation.
  • Testnet
    1. Here's an example configuration file using the off-chain components deployed on the Rootstock Testnet (https://public-node.testnet.rsk.co).

      Important: Due to specific modules enabled in the RSKj nodes, the RIF Relay Server cannot connect to the public nodes.

        {
          "app": {
              "url": "https://backend.dev.relay.rifcomputing.net",
              "port": 8090,
              "devMode": true,
              "logLevel": 1,
              "feePercentage": "0",
              "workdir": "/srv/app/environment"
          },
          "blockchain": {
              "rskNodeUrl": "http://172.17.0.1:4444"
          },
          "contracts": {
              "relayHubAddress": "0xAd525463961399793f8716b0D85133ff7503a7C2",
              "relayVerifierAddress": "0xB86c972Ff212838C4c396199B27a0DBe45560df8",
              "deployVerifierAddress": "0xc67f193Bb1D64F13FD49E2da6586a2F417e56b16"
          }
      }

      The contracts used in this setup are the primary contracts available on the Rootstock network. These primary contracts, however, do not include support for the CustomSmartWallet.

      For details of each configuration key used in setting up the RIF Relay Server, refer to the RIF Relay Server Configuration documentation.

    2. To start the server, execute the following command:

      npm run start

      By default, the server uses the default.json5 file in the config directory. Depending on the profile in NODE_ENV, the values in the default.json5 file is overriden. Therefore you need to setup the NODE_ENV environment to testnet.

      At this point, the server should be running and ready to start processing transactions; however, you still need to register the off-chain components in the Relay Hub. For the registration process, the Relay Manager and Worker must have funds.

    3. To get the addresses, this requires the server to be active. In a different terminal window, execute the following command:

      curl http://<SERVER_URL>/chain-info
      {
        "relayWorkerAddress": "0xabf898bd73b746298462915ca91623f5630f2462",
        "relayManagerAddress": "0xa71d65cbe28689e9358407f87e0b4481161c7e57",
        "relayHubAddress": "0xe90592939fE8bb6017A8a533264a5894B41aF7d5",
        "feesReceiver": "0x52D107bB12d83EbCBFb4A6Ad0ec866Bb69FdB5Db",
        "minGasPrice": "6000000000",
        "chainId": "31",
        "networkId": "31",
        "ready": false,
        "version": "2.0.1"
      }
    4. Send an arbitrary amount of tRBTC, 0.001 tRBTC for example, to the Worker and Manager.

    5. Now execute the register command.

      npm run register

      Here's an example of the register.json5

      {
        "register": {
          "stake": "REGISTER_STAKE",
          "funds": "REGISTER_FUNDS",
          "mnemonic": "REGISTER_MNEMONIC",
          "privateKey": "REGISTER_PRIVATE_KEY",
          "hub": "REGISTER_HUB_ADDRESS",
          "gasPrice": "REGISTER_GAS_PRICE",
          "relayUrl": "REGISTER_RELAY_URL",
          "unstakeDelay": "REGISTER_UNSTAKE_DELAY"
        }
      }

      The register process performs the following actions:

      • Stakes the Relay Manager
      • Adds the Relay Worker
      • Registers the Relay Server

      The server is now ready to start processing transactions and a ready message is diplayed on the console. For more details on configuration and registration parameters, refer to the RIF Relay Server documentation.

  • Mainnet
    • To run RIF Relay Server on the Rootstock Mainnet, the procedure is the same as the one on Testnet, the only difference is the configuration. Configure it to use contracts deployed on Mainnet and an RSKj node connected to Mainnet.

Receive updates

Get the latest updates from the Rootstock ecosystem

Loading...